Rust Smart Switch: how to pair it and control turrets, doors and lights
A Smart Switch is an improved electrical switch that you can turn on or off from Rust+ or manually. Smart Alarms are the other half: they send a customizable push notification when an electrical signal is detected.
What a Smart Switch is good for
- Turn turrets on before you log out and off when you come back
- Open or close doors that run on electricity
- Switch base lights or other devices without logging in
How to pair a Smart Switch
- Place the Smart Switch and connect it to the electrical contraption you want to control, with power.
- Hold down the Use key (E) on the switch and select the pair option.
- Open Rust+ on your phone. The switch shows up there and you can flip it remotely.
Security note
A Smart Switch needs building privilege to be turned on or off manually, so it is a convenient and secure addition to your base. Make sure the players who should control it have privilege.
Automate it with Raid Alarm
Raid Alarm adds Smart Automation on top of this. One alarm can flip every switch you have set, such as turrets, doors and lights, together, on the schedule you choose. Your defenses react the moment a raid starts, and you can keep devices on a timer without remembering to toggle them.
Power matters
Every smart device needs electricity. Check that your batteries and generators can support everything connected to them, and test the whole circuit after you change it.